SpeedFactory 4 Bar Map Sensor - B/D/H/F Series E-AT & AH *Requires spindles that use a

*Requires spindles that use a 242mm rotor - the caliper spacing is different from those using the 262mm setup

This baffle system prevents oil surges due to oil shifting caused by centrifugal forces

The KS tuned Front Drag Brake Kit is designed to stop a drag car that is equipped with a parachute

changed the shocker to a scissor just so it can be rated PG(probably mass marketing purpose) and called it their own

EPMAN Digital Exhaust Gas Temp Gauge

SpeedFactory 4 Bar Map Sensor - B/D/H/F Series E-AT & AH *Requires spindles that use aSpeedFactory 4 Bar Map Sensor B D H F Series Our SpeedFactory 4 Bar MAP sensors use state of the art bipolar op amp circuitry with thin film resistor networks built into each micro chip. Pressure changes are calculated on a true linear 0 5 volt scale via a specially designed silicon pressure sensor that also compensates for temperature changes. The unique ability to compensate for temperature changes allows our MAP sensor to remain a minimum of 99%